JK810自動一體化全液壓潛孔式鉆機

 

JK810一體式全液壓潛孔鉆機更低的價格，更高的配置，是金科鉆孔與阿特拉斯一體化解決方案具性價比的代表之作。

JK810一體式全液壓潛孔鉆機是一款可以為您帶來更高自動化、更高鉆進效率的產品，運行可靠，操作簡單。標配有滿足FOPS要求的駕駛室和自動換桿系統,加寬重型行走機構,在滿足快速移動的同時兼顧更好的安全性，液壓除塵系統可滿足礦山的最新的環保要求，是現代綠色礦山開采的可靠解決方案。

 

回轉機

雙擺線馬達回轉裝置，回轉扭矩大、不容易卡鉆，可以根據不同巖層調節回轉速度，進口回轉密封件封性好、壽命長。

Rotation unit

The equipped double cycloid motors can outputmassive torque and reduce possibility of pipe-stucksituation. And the rotation rate can be continuouslyadjusted according to different rock formations.            

Theimported seals for the rotation unit is with extraordinary performance and long service life.

 

駕駛室

全封閉篤室配置帶冷暖空調FOPS達到歐美勞動保護標準，

全方位安全寬廣清漸使得駕輕害對各個角度準確拿控題過400m的寓地可距，滿足各種嚴茍路面通過要求，減少底盤碰撞可能。

Cabin

The sealed air conditioned cabin is made with Fopswhich meets EU and US safety protection standards.

The all-around large safety windows offer greatvisibility and help the operator control the rigprecisely from all angles.

The high ground clearance of over 400mm suitsvaneties of tough terrain and minimizes the possibility of collision with ground.

 

空壓機

采用阿特拉斯原裝兩級壓縮機系統，可提供20bar-18.5m3壓縮氣體強勁輸出，性能可靠，適合于各種硬度巖石，實現更快進尺游力有余。

Air compressor

The high-output Atlas Copco air compressor featurestwo stages of compression, delivering pressure of20bar and FAD of 18.5m/ min  Powerful and reliable, itsuits rock formations of various hardness and offershigh penetration rate with ease.

 

自動接卸桿系統

儲桿和自動接卸桿的功能操作簡單，采用單個手柄就可以實現接桿收桿。機械手開合以及鉆桿倒庫的全部動作。

接卸桿用上下夾緊的方式便于松開鉆桿接頭，提高了工作效率。

Automatic pipe handling system

All the functions, such as pipe storage, pipe loading andunloading, movement of the mechanical clamps, can becontrolled very easily with one single joystick.

Loading and unloading of the drill pipes are easily achievedby upper and lower clamping, greatly raising the working.

 

操作系統

操作系統簡潔友好，易于上手，鉆機的工作運行參數、操示報警功能集中在儀表臺上，便于操作者觀察，各項數據一目了然，鉆機的開孔角度，空壓機的運行參數實時顯示，方便操作者準確布孔，掌控全局。

Operation system

The operation system is simple and ergonomically friendly.

The rigs operating parameters, instructions and wamings allcan be clearly displayed on the dashboard, easy for the operator to monitor.

The real-time display of hole collaring angle and compres-or operating parameters help the operator drill holesrecisely and control the rig easily.

 

操縱臺

操縱閥集中布置，采用大量手動直控液壓操作系統，性能可靠，維修簡單，便于鉆機的各項操作控制�？焖偻七M及提升操作，減少輔助時間，提高工效。推進力可調控制，根據鉆進需要隨時調節。

Control panel

The concentrated levers make the operation more easier.

The adoption of massive manual hydraulic operationsystems ensures reliable performance, simple operationand low maintenance cost. Fast feeding and liftingdecrease auxiliary time and increase working efficiency.

Feeding force can be adjusted anytime if needed.

 

發動機

采用國Ⅲ排放標準電噴渦輪增壓水冷發動機，功率強大、省油；雙級空氣過濾系統保障入氣清潔，大大降低發動機故障率

Engine

The water-cooled EFI turbo engine offers morepower, consumes less fuel and complies with the

National Ill emission standard. The two-stage airfilter system ensures intake of clean air and great-ly reduces the engine failure rate

除塵系統

高效全液壓除塵器，帶有滑動式捕塵罩。收塵效率高，性能穩定，有效的延長了鉆機的使用壽命，保證作業人員的身體健康，環保效果好

Dust collecting system

The efficient hydraulic dust collector is equipped with a sliding dustcover. It boasts high dust collecting efficiency and stable perfor-mance, extends the rig s service life and ensures a clean workingenvironment for the operators.

 

底盤

采用工程機械四輪帶底盤，結構強度好，加寬履帶行走平穩，爬坡能力強，鑿巖作業時更加平穩。

浮動式車架，前后浮動10°。行走高低雙速可調，工地間轉移快捷，

Undercarriage

The heavy-duty undercarriage features robust structural strength,wide tracks and excellent grade ability, which all ensure better stabili-ty while drilling.

The undercarriage can oscillate 10 back and forth, featuring adjustable dual speed and fast maneuverability between sites.

 

維護保養

維護保養便利，保養點和檢查點觸手可及，發動機艙布局合理，多個機罩門開合方便，使得保養和服務十分便捷。

Repair and maintenance

Maintenance and repair are very convenient thanks to that the maintenance and check points are easily accessible, engine compartmenwell organized, and all service doors can be easily opened and closed.

JK810全液壓潛孔式鉆機技術參數

[本信息來自于今日推薦網]